Now it finally arrived and went straight to action: our new 60-tonnes Electric Crane. With his enormous lifting capacitiy of 60 tonnes it bridges the gap to extremely high weights, that we have not been able to lift before. Due to its modular construction, this crane is able to reach a maximum lifting capacity of 60 tonnes by loading additional ballast onto it. However the basic vehicle is light enough to be transported without explicit permit and can flexibly be deployed at very short notice. It has a fully electric power unit and is thereby working emission-free. It can be controlled either from the cabin or by a remote control. Due to its small dimensions (height and width each 2,35m) it can be used even in the smallest driveways. The use of different hydraulic jibs allows us to lift extreme weights even in confined spaces up to the roof. These photos show the transport of heavy-weight machinery (26-tonnes). 

Merken

Merken

Merken

Merken

Merken

Merken

Merken

Merken

Merken

Diesen Beitrag teilen:

This new truck mounted crane is another addition to our equipment fleet. Now we are able to load up, unload and transport heavy unit weights even in narrow spaces with a single vehicle. In this case, a component of 3.6 tonnes was lifted up inside the building and placed on the vehicles cargo platform – all in one step. This vehicle is suitable for the loading and transport of machinery, containers etc. It can be operated with an appropriate trailer as well.

 

Diesen Beitrag teilen:

Another gap, that has been closed. From now on we are able to transport forklifts up to a height of 3.8 meters under a tarpaulin. Our new inloader can be hydraulically lowered to the ground. Therefore the forklifts can be driven onto the inloader at ground level, so without any gradient. That is why even machines with a very low ground clearance can be loaded without any problems. Needless to say, this trailer also has a sliding roof, so loading by crane is possible as well. A large number of lashing points guarantees for a diligent cargo securement.

 

Diesen Beitrag teilen:

A job for „Hubert“

In this case, a large steel tank needed to be replaced on an industrial site. Therefore the steel tank was moved out of the building, lifted up with a separately mountable crane hook for our forklift and then transported in a suspended position into the new building. At his new position, the steel tank is placed on a steel construction right under roof. To lift it up there, the mountable crane hook was replaced heavy forks. Here you can see the benefits of our very compactly designed forklift compared to a telescopic crane

  

This job was done within half a day!

 

 

Merken

Merken

Merken

Merken

Merken

Merken

Merken

Merken

Merken

Diesen Beitrag teilen:

Once again this was tight!

Actually the job was to move some compactors up to a weight of 11 tonnes on an industrial site. As usual, we had to deal with confined space conditions. First problem was, that the machines were too high to simply be moved from one building into another. This made it necessary to put the machines on their side before they could be moved. In this case, some of the factory gates had a height of only 2.65 meters, which mostly is too narrow for cranes and forklifts of that size. Luckily Hubert, who took part in this mission too, is only 2.52 meters high. Our Bakran is in fact 2.74 meters high but fortunately we are able to dismantle the upper part of the cabin, which reduces its height to 2.51 meters

The job was done as planned!

 

 

 

Merken

Merken

Merken

Merken

Merken

Merken

Merken

Merken

Merken

Diesen Beitrag teilen:

„Hubert“ – our new electric (compact) forklift was definitely the biggest and heaviest exhibit on this years exhibition of the supply industry of mechanical engineering companies (FMB in Bad Salzuflen)

„Hubert“ is indeed a little power pack with enormous potential. Therefore he provoked a lot of interest and amazement under the visitors.

And of course he is looking forward to his next challenge with high loads in narrow spaces!

 

 

 

 

Merken

Merken

Merken

Merken

Merken

Merken

Merken

Merken

Merken

Diesen Beitrag teilen:

The truck is ready to be unloaded but the machine is either too heavy or there is no lifting device available at all.

In this case, a client called and asked for a forklift to unload 2 machines of 8 tonnes each from a truck and move them into the building – immediately! Definitely a job for „Hubert“ – our new electric forklift.

2 hours later, the first machine was already unloaded and on the exact same day, both machines were placed in their designated positions inside the building. As „Hubert“ is completely powered by electricity, he is very quiet and totally emission free. Therefore the two machines could be brought into the building without interrupting the production process of other machines inside the building.

„Hubert“ – our new electric forklift with a lifting capacity of up to 20 tonnes!

 

lutter_notfall_elektrostapler2

Merken

Merken

Merken

Merken

Merken

Merken

Diesen Beitrag teilen: